Weeb Labs has posted a first preview of DSPi running on the Raspberry Pi Zero 2 W , published as a release on GitHub. It’s a ready-to-write SD card image, and DSPi’s own firmware (v1.1.6) runs unchanged on a bare-metal port, meaning the code runs straight on the hardware without an operating system under it. This is early bring-up work, so there are rough edges.
Only the Zero 2 W works. The first-generation Zero and Zero W won’t run the image. Pins follow the table in the release rather than whatever DSPi Console’s pin settings say, and a 5 V signal or a coaxial S/PDIF output should not go straight into a GPIO pin.
The card also carries a USB loader. The pizero_load.py script in the repository sends a newer build over USB, which runs until power is removed. Copying that build onto the card as kernel.img makes it stick. The image was built from commit fe2eea5, with GPU boot files from raspberrypi/firmware 1.20260915 under their own licence.…