Web tension control connects mechanics, drives, sensors and the operator interface. During winding, reel radii change, a measurement may be distorted and a command may arrive late. SLX ReelSync provides a fully simulated bench for observing these conditions in 3D, linked over Wi-Fi to a Raspberry Pi dashboard with an LVGL interface.
The ReelSync embedded dashboard project describes the system architecture. The PC calculates the line; the panel is its operator interface, not a second independent simulation.
Why reel radius changes the control problem
At a constant linear speed, a small reel turns faster than a large one. The kinematic relationship is v = ω · R : at 2 m/s, a 0.10 m radius requires approximately 191 rpm, while a 0.30 m radius requires about 64 rpm. A reference expressed only in rpm therefore cannot keep web speed constant throughout the run.
Torque also depends on radius. In an ideal static case, τ = F · R : 80 N corresponds to 8 N·m at a 0.10 m radius and 24 N·m at 0.30 m.…