
Mousavi posted a humidity monitor on Hackster.io that watches a room and says when it’s time to switch on a humidifier. The original plan was full automation: a DHT11 sensor and a 5V relay to power a cool mist humidifier when the air got dry. That didn’t work. The humidifier has its own logic controller with a touch button and auto mode, so cutting and restoring power at the wall didn’t register with it.
The project became an alert system instead. An Arduino Nano reads the DHT11 on digital pin 5 once every 2 seconds. Below 65% or above 80% humidity, a red LED and an active buzzer come on and the green LED goes dark. Inside that range, the green LED is lit and the board stays quiet.
A Windows Forms app written in C# connects over the serial port at 9600 baud and shows the live readings in a dark theme, green for safe and red for out of range. It uses Invoke to update the interface safely from the serial thread.
See more at hackster.io.