Menu

Making an electronic busy board
📰

Making an electronic busy board

Adafruit Industries – Makers, hackers, artists, designers and engineers!·Anne Barela·13 days ago
#8BMlnnCt
#adafruit#board#electronic#wrote#burningimage
Reading 0:00
15s threshold

Making an electronic busy board

andyc built an electronic toy for his nephew and wrote up the design at burningimage.net. It’s called an electronic busy board. It has multi-colored LED bar graphs, a four-digit 7-segment display, push buttons, and a rotary encoder.

The displays are multiplexed, so the firmware cycles through the digits faster than the eye can follow. Dedicated driver chips like the MAX6954 would have handled that, but at over $20 each he wrote the code himself. The microcontroller is a PIC18F67K40 with 60 GPIO pins in a 64-pin package, and every one of them is used. There’s no voltage regulator: the board runs directly from three AAA cells, using a PIC microcontroller.

Everything is driven by hardware timers, six of them, each firing at a different rate, with button presses on low-priority interrupts so the timers keep running during the 50ms debounce delay. After 10 minutes of inactivity, the board drops to a low-power state drawing 374 nA.

See the video below and more at burningimage.net.