I put together a room temperature and humidity monitor to see how the room changes after the heating comes on. The hardware is a classic ESP32 Dev Module and a three-pin DHT11 sensor: 3V3 to +, GND to -, and GPIO18 to signal. The firmware is an Arduino sketch using Adafruit DHT / Unified Sensor and ESP32 core WiFi, WebServer and LittleFS support. I used AI coding assistance during development.
Readings are taken every 2.5 seconds, with a persistent flash sample every 30 seconds. The board can keep recording while powered from a USB wall supply, even with the computer off. Its circular buffer holds approximately seven days; once the local Node.js server starts, it imports missing readings over Wi-Fi into a daily JSON archive.
The browser interface includes live readings, date/time navigation, 1/6/24-hour graphs, CSV export, English/Italian options and outdoor weather from Open-Meteo.…