Menu

Heat Bending Reeded Sheet Plastic Lampshades

#maker#redditmaker#plastic#heat#sheet
Reading 0:00
15s threshold

Hey there! I have a project for which I am making custom lampshades. I plan to laser cut acrylic sheets into 20cm x 40cm rectangles, and then heat them gently in the oven to soften. I'll then form them around an aluminium cylinder.

I have done similar using a heat gun and a cubic wooden form, slowly softening the plastic at the corners and pressing it into shape (wearing gloves of course). This worked great. As this project I am making cylindrical lampshades, the whole sheet of plastic will need to end up curved, so I think heating it evenly in the oven will work, plus they are smaller pieces and the previous project would not have fit in the oven.

The plastic I am using is 5mm reeded acrylic, shown here -

https://www.sheetplastics.co.uk/5mm-reeded-clear-acrylic-sheet-cut-to-size

The diameter of the aluminium mould is 90mm with wall thickness 5mm.

I would heat the sheet of plastic flat on a clean baking tray, with greaseproof paper underneath.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.