Jiao Xianjun has posted new Starlink terminal measurements on sdr-x.github.io, made with an AD9361 software defined radio, switched by hardware instead of software. The earlier software-controlled setup managed 10,000 frequency hops per second. The hardware version reaches 80,000, changing channel every 12.5 microseconds, so all eight Starlink channels are scanned in 100 microseconds. The datasheet lists 20 to 30 microseconds of settling time, but the measurements show 10 microseconds is enough for stable in-band energy readings, leaving 2.5 microseconds to integrate the energy.
Two SDRs and two satellite TV LNBs watched the terminal’s uplink transmissions and its receiver local oscillator leakage at the same time. The terminal picks the same channel number for both directions, even though the uplink is eight 62.5 MHz channels in 14.0 to 14.5 GHz and the downlink is eight 500 MHz channels in 10.7 to 12.7 GHz.…