Ask people why their LED strips failed and you will hear about bad solder joints, cheap power supplies, and water ingress. All true. But the failure mode I see most in real installs is boring: heat.
LED strips are rated for a lifespan at a specific board temperature, usually around 25 degrees C on the copper. Run them hotter and the lifespan curve falls off a cliff. A strip rated for 25,000 hours can be down to a few thousand hours if you bake it at 60 degrees. And a strip stuck to a wooden shelf or tucked into a ceiling cavity with no airflow can easily sit at 50-60 degrees under full white.
Why free-air ratings lie to you
Most strip datasheets quote lifespan with the strip hanging in free air at room temperature. That is a lab condition, not an install condition. In the real world the strip is attached to something, covered by a diffuser, or buried in a profile where the heat has nowhere to go. The hotter the strip runs, the faster the phosphor degrades and the more the color shifts.…