The Rhode Island Computer Museum has posted a long restoration log for a DEC PDP-8/E, covering work from February 2014 into 2016. The machine came in with mouse droppings in the chassis, dead panel lamps and two processor boards installed backwards. The Omnibus backplane carries a manufacturing date of 5/14/74.
Much of the log is careful fault finding. One core stack was installed upside down and shorted Omnibus lines. Bad 7474 flip-flops turned up again and again, including one on the M8650 serial board that left outgoing characters without a stop bit. A 32k RAM board kit replaced the core stacks, but its fast 74ABT parts reacted to bus glitches, so slower LS and ALS parts were used instead. Later the +5V and -15V supplies both failed, one from a bad LM723 and one from a loose ground screw.
By the end, the system boots OS/8 from an RX01 8″ floppy, a TU56 DECtape and an RK05 disk pack.…