The idea behind this project was that I wanted a dim (white!) clock in my bedroom rather than a floodlight on my nightstand - and I wanted to keep the design as simple as possible. I haven’t come across a setup like this before.
So I built a projector clock using a 1.3" OLED display powered by an ESP32-C3. I bought a lens with a focal length of 130 mm and a diameter of 50 mm. I designed and 3D-printed a case to fit the lens and the electronics. Afterwards, I clad the case with oak wood strips.
As you might imagine, the time is only readable when the room is dark, but that’s exactly what I wanted for my use case. I think this design should work with every display.…