Olimex has announced UEXT-CH390 on the company blog, a small open source hardware module that adds 100 Mbit wired Ethernet to any board with a UEXT or pUEXT connector. UEXT is Olimex’s own connector standard for add-on boards. The module uses the WCH CH390 SPI-to-Ethernet controller, measures 50 x 21 mm, and carries both the classic UEXT header and the smaller 1.0 mm pUEXT one.
CH390 is supported in Arduino and ESPHome, so it’s a way to get a cable connection on a Raspberry Pi PICO or PICO2, or on ESP32 parts that don’t have a wired Ethernet MAC like the ESP32-S3, C3, C5 and C6. ESPHome only supported CH390 on ESP32, so Olimex wrote the RP2040 driver. The example project pins a version of the ESPHome Ethernet component, built and tested with ESPHome 2026.9.0, and there’s a ready-to-flash UF2 that shows up in Home Assistant.
A plain Pico SDK example with lwIP and a small web server is there too. KiCad sources, schematic and firmware are all published.…