Menu

The 19 pins of an HDMI Type A connector
📰

The 19 pins of an HDMI Type A connector

Adafruit Industries – Makers, hackers, artists, designers and engineers!·Anne Barela·6 days ago
#TG63ltmr
#adafruit#pins#grouping#signal#pairs
Reading 0:00
15s threshold

The 19 pins of an HDMI Type A connector

JLCPCB posted a breakdown of the HDMI Type A connector on X, covering what the 19 pins are for and why that grouping shapes a board’s layout.

The pins fall into a few signal groups. The TMDS pairs carry the video and audio data, and they’re differential, meaning the signal is split across two wires that have to be routed together as a matched pair. DDC is a small I2C bus for reading the display’s capabilities. CEC is the control channel that lets connected devices send commands to each other, HPD is hot plug detect, which tells the source that a display has been connected, and the rest is power and ground.

The reason the grouping is important is impedance control. The high-speed pairs need traces of a specific width and spacing over a ground plane to hold the right impedance, so knowing which pin does what helps decide how the traces are routed.

See more at x.com.