Menu

Waveshare ESP32 S3 Touch Amoled 1.64" - WIFI Issues Ceramic Antenna

#esp32#redditesp32#antenna#amoled#board
Reading 0:00
15s threshold

Board: https://docs.waveshare.com/ESP32-S3-Touch-AMOLED-1.64

I have the Waveshare ESP32 S3 Touch Amoled 1.64", the ceramic antenna is not performing as expected, is there anyone else with such problems?

Title: ESP32-S3-Touch-AMOLED-1.64 (Rev1.1) — Wi-Fi only at arm's length, external antenna on J3 changes nothing. Schematic says the chip antenna is DNP. Looking for someone with the same board. Body: Board: Waveshare ESP32-S3-Touch-AMOLED-1.64, silkscreen Rev1.1, ESP32-S3R8. Symptom: Wi-Fi barely works. SoftAP visible at ~0.3 m. Receives my AP at -90 dBm while a Raspberry Pi 5 on the same desk hears it at -65 dBm — a repeatable 25 dB gap. Ruled out, with measurements: - TX power: esp_wifi_get_max_tx_power() reports 80 (20 dBm) before and 78 (19.5 dBm) after setting it; modem sleep off, WIFI_PS_NONE. - AMOLED interference: with the panel never initialised (LCD firmware on the AMOLED board, screen black, QSPI idle) range is identical. Brightness 0 vs 200: under 2 dB difference.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.