Menu

I turned an ESP32-C5 touchscreen board into a standalone 2.4/5 GHz interference and jamming detector, built on ESP-SDR (receive only)
📰

I turned an ESP32-C5 touchscreen board into a standalone 2.4/5 GHz interference and jamming detector, built on ESP-SDR (receive only)

#esp32#redditesp32#alarm#sweeps#code
Reading 0:00
15s threshold

When ESPARGOS released ESP-SDR, which uses the undocumented raw I/Q capture in ESP32 chips, I wanted something that runs without a PC. So I built a pocket RF watchdog on a Waveshare ESP32-C5-Touch-LCD-3.5. It sweeps both Wi-Fi bands, learns what normal looks like, and warns you when the spectrum stops looking normal.

What it does

Sweeps 2400–2483.5 MHz and 5150–5895 MHz in 48 MHz slices at 80 MS/s, stitched into one spectrum per band (312.5 kHz bins).

With both bands on: about 4.5 sweeps/s on 2.4 GHz and one 5 GHz sweep every 0.83 s. With 5 GHz turned off in settings, 2.4 GHz runs at about 12 sweeps/s.

Learns a per-bin baseline for 60 s, stores it in flash and keeps tracking slow drift.

Flags four kinds of interference: raised wideband floor, a persistent narrowband carrier, a narrow signal sweeping across the band, and pulsed wideband energy (a microwave oven is the classic one).

States are NORMAL, SUSPECT and ALARM.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.