Menu

Reading 0:00
15s threshold

Hi guys I'm developing a gps tracker kind of device using an ESP32-S3-WROOM-1 module as the processor. My pcb's meant to connect to the esp32 over the usb data pins and a usb-c port. A schematic diagram and image of the layout can be seen below.

Problem: No matter what I try, my windows pc doesn't detect the ESP32. Not even a "failed usb connection" prompt or anything. Absolutely zero connection. I'd appreciate any hints that can help find the root of the problem.

Extra Info: VBAT = 4.0V, 5V from USB reads as 4.75V, 3V3 reads 3.3V, 8.8V reads 8.9V, GNSS3V3 (irrelevant) reads 3.3V. USB D+ reads HIGH (3.3V), USB D- reads -0.35V (close to 0). the USBLC6 ic is correctly oriented. I've double checked all solder connections. I've tested both positions of the on switch. really have no clue what could be happening here. The BMP581 altimeter is not soldered on yet, but I think thats irrelevant. This project uses a 2000mAh lipo battery.

yes, I'm using a data usb-c cable.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.