Hi, I’m working on a DevOps dashboard for a Waveshare ESP32-S3-Touch-LCD-4.3 (800×480 RGB, ST7262, ESP32-S3 with PSRAM). It uses Arduino, LVGL 9, ESP32\_Display\_Panel, and ESP32 core 3.3.12.
I am a C# guy, so this work is mainly Opus 5.5 code 🤪.
The display is generally stable, but I sometimes get a brief, single-frame flash when the firmware fetches data from a REST API over HTTPS. The request runs in a FreeRTOS task pinned to Core 0; LVGL runs in a separate task pinned to Core 1. The tasks don’t share LVGL objects—the API task publishes a data snapshot protected by a critical section.
The display uses two RGB565 framebuffers in PSRAM and a 20-line RGB bounce buffer in internal SRAM (\`800 × 20\` pixels). The board’s RGB pixel clock is still at its default 16 MHz. The LVGL task uses DIRECT mode and switches framebuffers after rendering.
There’s also a VSYNC workaround in the display port for a suspected ESP-IDF 5.5.5 bounce-buffer DMA EOF counter issue.…