I’m a beginner working on a project that uses scales to log a weight and if the weight changes then a buzzer sounds and a light flashes. I managed to prototype successfully on a breadboard, but since designing the custom PCB in KiCad it’s just not working at all.
My hardware:
MCU: ESP32-S3-WROOM-1 module
Function: Reads load cells (HX711), drives LEDs + buzzer, simple display
Power: Battery-powered (3.7V Li-ion via TP4056 + regulation)
USB-C used for programming + power
I’m not sure if the PCB powers (PSU is a 18650 battery, chargeable via USB-C). The ESP32 does not boot or enumerate over USB/no serial output is detected. I also can’t upload code via Arduino IDE.
I think I’ve made a critical error by not adding a boot and IO button to the ESP32 module for testing.
I’m not sure if there’s an incompatibility from the footprints designed on KiCad and the available components supplied by PCBWay.
I think the USB-C wiring is correct (D+/D- routed), and I’ve attempted multiple cables/ports.…