Greetings humans!
FILES
This is a desk clock I have been working on for a while and finally cleaned up enough to share. Four 0.96" SSD1306 OLEDs in a 2x2 grid: hours top-left, minutes top-right, weekday and date along the bottom. An ESP32-C3 SuperMini drives them through a PCA9548A I2C mux on a custom 74 x 74 mm two-layer board.
The case is a printed shell with a laser-cut 3 mm clear acrylic back, engraved on the inside face, so you look straight at the board. There is a printed back too if you have no laser cutter.
What is on the board:
ESP32-C3 SuperMini, PCA9548A mux for the four screens
DS3231 RTC with a CR2032 clip, so it has the time the moment you plug it in
SHT31 temperature and humidity, plus a phototransistor for auto-dim
Three addressable RGB LEDs in a vertical column
24LC256 EEPROM in a DIP socket for settings, wear-levelled, survives any reflash or chip erase
Four Omron B3F buttons, two USB-C ports (the SuperMini's own for flashing, a rear one for everyday power)
Surface-mount parts…