
rh1tech (Mikhail Matveev) has published the first release of frank-xt8086 on GitHub. It’s firmware for the xt8086 board, where a Raspberry Pi RP2350B microcontroller acts as the whole chipset around a real Intel 8086 or NEC V20 processor. That means the RP2350B handles the support hardware an early PC needed, while the original CPU does the work.
You flash the frank-xt8086-1.00.uf2 file with a Debug Probe, or hold S3 (BOOTSEL), press S4 to reset, and copy the file to the drive that shows up. Floppy and hard disk images go in a /XT/ folder on a FAT32 microSD card. Pressing DEL at the splash screen opens SETUP, and while the machine is running, Win+F11 opens the drive menu and Win+F12 opens SETUP.
This build doesn’t have a serial console, since GP44 is the right audio channel on the board. Building with UART_CONSOLE=ON brings the console back and makes the audio mono. The code is GPL-3.0-or-later.
See more on GitHub.
