Menu

Wearable Arc Reactor Mark I: a self-contained ESP32-C3 replica
📰

Wearable Arc Reactor Mark I: a self-contained ESP32-C3 replica

Adafruit Industries – Makers, hackers, artists, designers and engineers!·Anne Barela·about 11 hours ago
#nrnuR09g
#adafruit#open#electronics#esp32#drives
Reading 0:00
15s threshold

Wearable Arc Reactor Mark I: a self-contained ESP32-C3 replica

Yiğit’s wearable Arc Reactor Mark I, written up on Open Electronics, is a battery-powered replica that lights up as soon as it’s switched on. A Seeed Studio XIAO ESP32-C3 drives a 24-LED WS2812B NeoPixel ring from GPIO 3, pulsing a fixed cyan (RGB 15, 200, 255) between brightness 20 and 150 with a 25 millisecond delay between updates, so the glow looks organic instead of strobing.

Power is a single 3.7 V LiPo cell charged through a TP4056, with a slide switch on the positive line. The 3.3 V output drives the WS2812B directly, because the lower supply voltage also lowers the threshold the data line has to reach. The ESP32-C3’s brownout detector trips near 2.8 V, so the firmware drops the WiFi and Bluetooth startup and runs the CPU at 80 MHz .

The shell is 3D printed in clear PETG and white PLA, scaled to 113% to fit the 24-LED ring. The build takes about four hours including printing, with the sketch uploaded from the Arduino IDE.

See more at open-electronics.org.