Menu

ESP32-C3 fishing line counter with a 3D-printed wheel
📰

ESP32-C3 fishing line counter with a 3D-printed wheel

Adafruit Industries – Makers, hackers, artists, designers and engineers!·Anne Barela·7 days ago
#oklQVef7
#adafruit#wheel#line#hall#counter
Reading 0:00
15s threshold

XiaoGai has posted a fishing line counter on Hackster.io, built from an ESP32-C3 SuperMini, a 0.96-inch SSD1306 OLED, an A3144E Hall module, a tactile button and a 3D-printed wheel. It doesn’t need a custom PCB or a pinch roller.

The line wraps once around the wheel on the side of the case. Pulling the line turns the wheel, and six 3x1mm magnets in the wheel pass the Hall sensor. The ESP32-C3 counts falling edges and multiplies by a calibrated distance per pulse, 14.66mm by default. The OLED shows meters in large digits, along with the pulse count and the current Hall level. The button resets the reading. It’s a single channel counter, so turning the wheel either way adds length.

The Hall module runs at 5V, so its output has to be checked and conditioned before it reaches GPIO4. A BSS138 level shifter is given as an alternative.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.