
rh1tech has released version 1.08 of frank-386, a port of the Tiny386 PC emulator to the RP2350, posted on GitHub. Builds run at 378 MHz with PSRAM at 133 MHz and USB HID on. With HDMI output the clock goes up to 504 MHz.
The big change is real HDMI instead of DVI, using the PIO HDMI driver from frank-quake2. USB capture cards that showed a blank picture before now get a stable one, tested for 100 seconds on an MS2109 card through BIOS, DOS, Volkov Commander and Wolf3D without dropouts. Emulated sound from AdLib, SB16 and the PC speaker now goes out over HDMI at 44.1 kHz stereo as well as I2S or PWM.
The mixer had been running at 45.45 kHz, so audio played about 3% sharp; it now averages exactly 44.1 kHz. Text mode, the OSD and 640-wide EGA palette entries are DC-balanced, which was what cost capture cards their sync. Colours 252 to 255 aren’t reserved for sync anymore, so 256-colour modes can use the full palette. If the DMA chain breaks, output restarts in about 100 ms.
See more on GitHub.