Menu

Resistive vs Wilkinson Power Dividers: When the Isolation Resistor Actually Matters
πŸ“°

Resistive vs Wilkinson Power Dividers: When the Isolation Resistor Actually Matters

#devcommunity#dev#wilkinson#resistive#resistor
Reading 0:00
15s threshold

A resistive divider is six resistors in a box. A Wilkinson divider is two quarter-wave lines and one resistor. They cost about the same, they both split power, and picking the wrong one is a mistake you will not notice until you are chasing an error budget three months later.

Here is where the two actually diverge, and how to decide in about five minutes.

What each one is doing

Resistive (lossy) divider. Every port sees 50 ohms, power is split by resistor network, and the split is flat from DC to as high as the resistors and the package will behave. The penalty is that the resistor network absorbs most of the input power before it reaches the outputs.

Wilkinson (reactive) divider. Quarter-wave transmission lines perform the split, and a single resistor bridges the two output ports.…

Continue reading β€” create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.