Menu

I built an X11 server that runs directly on an ESP32-S3
πŸ“°

I built an X11 server that runs directly on an ESP32-S3

#esp32#redditesp32#server#touchscreen#linux
Reading 0:00
15s threshold

I started this project because I wanted to use a small touchscreen as a Linux display without building an entire Linux computer into it or treating it as a dumb remote framebuffer.

The result is Woodland X11 β€” an experimental X11 server running directly on an ESP32-S3.

Why ESP32-S3?

I already had an Elecrow CrowPanel Advance 4.3" touchscreen with an ESP32-S3. Its PSRAM, LCD interface, touch controller, Wi-Fi connectivity, and available GPIO made it an interesting platform for the experiment.

The challenge was to see how much of a real X11 server could fit on this hardware.

Software and libraries

The X11 protocol handling is a custom implementation, rather than a port of Xorg or a remote framebuffer viewer.

The firmware uses ESP-IDF and LovyanGFX for the display hardware. I wanted direct control over the protocol implementation, memory usage, and rendering rather than adapting an existing desktop X server.

The X11 clients run on Linux.…

Continue reading β€” create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.