Menu

Guition jc4880p443 with JC-ESP32P4-M3 : how to set jumpers for external antenna?

#esp32#redditesp32#antenna#wifi#signal
Reading 0:00
15s threshold
Guition jc4880p443 with JC-ESP32P4-M3 : how to set jumpers for external antenna?

On this Guition 4.3" screen, I see the U.FL socket to attach an external antenna to boost the WiFi signal. But all my searches claim there is a 3-pad rotating switch next to it, to set it to external antenna use over internal. I don't see that setup here. So once I hook up an antenna, any ideas on jumpers, etc I need to set as well?!

Longer story: I'm using as a Home Assistant screen, and ESPControl (software based on ESPHome) worked really well. It updated the firmware on the C6 modem. But I switched to Tessera (another ESPHome variant), and for some reason the WiFi signal is not cutting it. Exact same hardware, charging cord, location, router, etc. I move it closer to the router and it works perfectly fine. Since I can't fix the software myself, I figure I'll add an antenna and get some DB's back on the WiFi signal!

Thanks in advance for the help.

submitted by /u/qbirdee
[link] [comments]