Menu

ESP-WiFi-Jam-Detector: a standalone 2.4 and 5 GHz interference detector built on an ESP32-C5 touchscreen board
📰

ESP-WiFi-Jam-Detector: a standalone 2.4 and 5 GHz interference detector built on an ESP32-C5 touchscreen board

Adafruit Industries – Makers, hackers, artists, designers and engineers!·Anne Barela·6 days ago
#zs7OFSoR
#adafruit#detector#wifi#interference#esp32
Reading 0:00
15s threshold

Jordan wrote in to RTL-SDR.com to share the ESP-WiFi-Jam-Detector, a receive-only radio interference detector built on a Waveshare ESP32-C5-Touch-LCD-3.5 touchscreen board and the ESPARGOS esp-sdr code. It uses the ESP32-C5’s own WiFi receiver to sweep 2400 to 2483.5 MHz and 5150 to 5895 MHz at 80 MS/s, and it runs without a computer.

At startup, it learns a 60-second baseline of the normal RF background. After that it raises an alarm on a raised wideband noise floor, persistent narrowband carriers or swept signals, and flags pulsed wideband energy as suspect. The touchscreen shows a live spectrum and waterfall. With an SD card inserted, it logs state changes and saves a waterfall image centered on alarms.

The firmware is open source under GPL-3.0, and a prebuilt binary is on the GitHub releases page.…

Continue reading — create a free account

Join HashtagPLUS to read full articles, follow hashtags, vote, and join the conversation.