Menu

Is a 1/2” gap at the ridge beam too restrictive for a vented assembly, assuming the ridge vent itself is 1-1/2” to 2” wide?

#roofing#redditroofing#ridge#vent#dimension
Reading 0:00
15s threshold
Is a 1/2” gap at the ridge beam too restrictive for a vented assembly, assuming the ridge vent itself is 1-1/2” to 2” wide?

If you get on a ladder, you can see the ridge vent spacing is 1.5-2” (blue dimension in pic 2). But the ridge beam is only 0.5 inches from sheathing (red circle is pic 1 and green dimension in pic 2). Builder says that’s 7 sq in of space per channel, and that’s totally plenty for air flow. (Even made the argument that once the mesh cobra material is nailed down, the vent is only a 0.5 to the exterior anyway, which made sense to me)

submitted by /u/add_to_tree
[link] [comments]